Sliding RV window

Product Info

RV Window Replacement | Camper Window | Tempered Tinted Glass | RV Window with Screen
*Sliding RV window with black frame and tinted glass.
*No exposed exterior fasteners, giving a flush exterior line.
*Flush low-profile screen design for improved clearance and retention.
*Tinted glass provides privacy while allowing ventilation.
*Covered weep chambers remove exposed holes and surface water tracking.

Product range
Sliding windows add daylight and controlled ventilation to the vehicle interior.
Two configurations are available: horizontal slide and vertical slide. The glazing is tempered glass, which breaks into blunt fragments, and it is tinted for privacy while retaining outward visibility from inside.
An insect screen is fitted, which allows ventilation while keeping insects out.
Before ordering a replacement window, the exact opening dimensions should be confirmed. The size is usually marked inside the window frame or can be measured at the opening. Insulated and tinted glazing carries a higher cost but improves interior temperature control and protects interior surfaces from UV damage.
Replacement requires only that the new window matches the existing opening in height, width and wall thickness. Insulated windows cost more than standard units but reduce heat transfer, which lowers the load on heating and air-conditioning equipment and keeps interior temperatures more even. They also protect against wind and weather damage, help prevent water ingress and reduce road noise inside the vehicle.

Insulated windows are built from two panes with a sealed air gap between them. The opening direction can be specified with the sliding mechanism, and exterior fiberglass or mesh screens are supplied to keep insects out when the window is open.

Parameter

Item No.	Size
71C11H	12”x22”
71C11I	14”x16”
71C11J	12”x24”
71C11K	18”x30”

Item No.	Size
71C11P	18”x15”
71C11R	20”x15”
71C11Q	24”x15”
71C11N	24”x20”
71C11M	24”x24”
71C11O	30”x20”
71C11S	30”x24”
71C11T	42”x12”
71C11U	42”x22”
71C11V	60”x30”

Factory Info

The factory covers 10,000 m² and manufactures RV windows and roof vents. It employs 60 staff, including three technical specialists and five quality inspectors, and the product qualification rate is 99%. The main production process comprises injection molding, electronic welding and assembly. Equipment includes 6 injection molding machines, punch presses and drilling machines.